Cutting Unit
Maintenance
1.
2.
Move traction control to Disengaged position.
To increase cable tension, loosen front cable jam
nut and tighten back cable jam nut (Figure 42 )
until a force of 12-16 lb. is required to engage
traction control.
SeparatingtheCuttingUnit
fromtheTractionUnit
Measure the force at the control knob.
1.
2.
Place the mower on its drums on a level surface.
Lower kick stand. Insert a 1/4" dia. pin or
equivalent into frame hole above kick stand
mounting bolt (Figure 44 ).
Figure42
1.
Tractioncable
2.
Service/parkingbrakecable
3.
4.
Tighten front cable jam nut.
Check control operation.
Figure44
1.
Kickstand
2.
1/4"Pin
AdjustingtheReelControl
3.
4.
Remove grass basket.
If reel control does not engage or it slips during
operation, an adjustment is required.
Remove (2) capscrews securing cutting unit pivot
arms to traction unit frame tube (Figure 45 ).
1.
Make sure traction control is properly adjusted;
refer to Adjusting the Traction Control, page .
2.
To increase cable tension, loosen front cable jam
nut and tighten back cable jam nut (Figure 43 )
(located on top of gear box) until the reel cable
force adds 7 to 10 lbs. of additional handle force
measured at the control knob.
Note: If traction control handle force is 12 lbs.,
the combined traction and reel force should be 19
to 22 lbs.
Figure45
1.
2.
Cuttingunitpivotarms
Tractionunitframetube
3.
Capscrews
5.
Rotate pivot arms forward (Figure 45 ) and rest
traction unit on restrained kickstand.
Figure43
1.
Reelcontrolcable
6. Pull cutting unit forward about 2 in. (51 mm) and
then to the right to disengage the transmission
coupling (Figure 46 ).
3.
4.
Tighten front cable jam nut.
Check control operation.
28
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04021, Toro 04200, Toro Greensmaster |
| Model Number | 04021, 04200 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | Nederlands, English, ελληνικά, Português, Svenska |
| Product Name | Toro Greensmaster Flex 21 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro Greensmaster - Flex Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)