•
•
When using any attachments, never direct discharge
of material toward bystanders nor allow anyone
near the machine while in operation.
• Never store the equipment with fuel in the tank
inside a building where fumes may reach an open
flame or spark.
Never operate the machine with damaged guards,
shields, or without safety protective devices in
place. Be sure all interlocks are attached, adjusted
properly, and functioning properly.
•
Allow the engine to cool before storing in any
enclosure.
•
To reduce the fire hazard, keep the engine, silencer,
battery compartment and fuel storage area free of
grass, leaves, or excessive grease.
•
•
Do not change the engine governor settings or
overspeed the engine. Operating the engine at
excessive speed may increase the hazard of personal
injury.
•
•
Check the grass catcher frequently for wear or
deterioration.
Keep all parts in good working condition and all
hardware and hydraulic fittings tightened. Replace
all worn or damaged parts and decals.
Before leaving the operator’s position:
–
–
stop on level ground;
disengage the power take-off and lower the
attachments;
•
•
If the fuel tank has to be drained, do this outdoors.
Be careful during adjustment of the machine to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
–
–
change into neutral and set the parking brake;
stop the engine.
•
•
Disengage drive to attachments when transporting
or not in use.
•
•
Disengage drives, disengage the cutting unit, set
parking brake, stop engine and disconnect spark
plug wire. Wait for all movement to stop before
adjusting, cleaning or repairing.
Stop the engine and disengage drive to attachment
–
–
–
before refuelling;
Clean grass and debris from cutting unit, drives,
mufflers, and engine to help prevent fires. Clean up
oil or fuel spillage.
before removing the grass catcher/catchers;
before making height adjustment unless
adjustment can be made from the operator’s
position.
•
•
Carefully release pressure from components with
stored energy.
–
–
before clearing blockages;
Disconnect battery and remove spark plug wire
before making any repairs. Disconnect the negative
terminal first and the positive last. Reconnect
positive first and negative last.
before checking, cleaning or working on the
mower;
–
after striking a foreign object or if an abnormal
vibration occurs. Inspect the mower for
damage and make repairs before restarting and
operating the equipment.
•
•
Use care when checking the reel. Wear gloves and
use caution when servicing them.
Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
•
Reduce the throttle setting before stopping engine
and, if the engine is provided with a fuel shut-off
valve, turn the valve off at the conclusion of
mowing.
ToroMowerSafety
•
•
Keep hands and feet away from the cutting unit.
Slow down and use caution when making turns
and crossing roads and sidewalks. Stop reels if not
mowing.
The following list contains safety information specific
to Toro products or other safety information that you
must know that is not included in the CEN, ISO, or
ANSI standard.
•
•
•
Do not operate the mower under the influence of
alcohol or drugs
This product is capable of amputating hands and
feet and throwing objects. Always follow all safety
instructions to avoid serious injury or death.
Use care when loading or unloading the machine
into a trailer or truck
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
Use of this product for purposes other than its intended
use could prove dangerous to user and bystanders.
MaintenanceandStorage
•
Know how to stop the engine quickly.
•
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
• Do not operate the machine while wearing tennis
shoes or sneakers.
5
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro 04021, Toro 04200, Toro Greensmaster |
Model Number | 04021, 04200 |
Model Year | 2005 |
Download File |
|
Document Type | Operator's Manual |
Language | Nederlands, English, ελληνικά, Português, Svenska |
Product Name | Toro Greensmaster Flex 21 |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Product Type | Walk Behind Mower |
Product Series | Toro Greensmaster - Flex Series |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)