AdjustingtheHeightofCut
1.
Adjust rear roller brackets (Figure 51 ) to upper
or lower position depending on desired height of
cut range.
•
The upper position (factory setting) is used
when height of cut settings range from 1/16
to 5/32".
•
The lower position is used when height of cut
settings range from 1/8" to 19/64".
Figure49
1.
Bedbaradjustingscrew
3.
Tilt mower on back to expose bedknife and reel.
4.
At one end of reel, insert a long strip of newspaper
between reel and bedknife (Figure 50 ). While
slowly rotating reel forward, turn bedbar adjusting
screw clockwise (on same end of reel) (Figure 49 ),
one click at a time, until paper is pinched lightly,
when inserted from the front, parallel to the
bedknife. A slight drag will be noted as the paper
is pulled.
Figure51
1.
2.
Rearrollerbracket
Height-of-cutarm
3.
4.
Locknut
Adjustingscrew
2.
Verify that rear roller is level and that bedknife
to reel contact is correct. Tip mower on back to
expose front and rear rollers and bedknife.
3.
4.
Loosen locknuts securing height-of-cut arms to
cutting unit side plates (Figure 51 ).
Loosen nut on gauge bar (Figure 52 ) and set
adjusting screw to desired height-of-cut. Distance
between bottom of screw head and face of bar is
height-of-cut.
Figure50
Note: Each time adjusting screw is rotated one
click clockwise, bedknife moves .0007 in. closer to
reel. Do not overtighten the adjusting screws.
5.
6.
Check for light contact at other end of reel using
paper and adjust as required.
After adjustment is accomplished, check to see if
reel can pinch paper when inserted from the front
and cut paper when inserted at a right angle to the
bedknife (Figure 50 ). It should be possible to cut
paper with minimum contact between the bedknife
and the reel blades. Should excessive reel drag
be evident it will be either necessary to backlap
or regrind the cutting unit to achieve the sharp
edges needed for precision cutting (see Toro reel
sharpening manual).
Figure52
1.
2.
Gaugebar
Heightadjustingscrew
3.
Nut
5.
Hook screw head on cutting edge of bedknife and
rest rear end of bar on rear roller (Figure 53 ).
30
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04021, Toro 04200, Toro Greensmaster |
| Model Number | 04021, 04200 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | Nederlands, English, ελληνικά, Português, Svenska |
| Product Name | Toro Greensmaster Flex 21 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro Greensmaster - Flex Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)