ServicingtheBedbar
RemovingtheBedbar
1.
Turn bedbar adjuster screw, counterclockwise, to
back bedknife away from reel (Figure 55 ).
Figure53
6.
Rotate adjusting screw until roller contacts front of
gauge bar. Adjust both ends of roller until entire
roller is parallel to the bedknife.
Important: When set properly, the rear and
front rollers will contact the gauge bar and the
screw will be snug against the bedknife. This
ensures that the height-of-cut is identical at
both ends of the bedknife.
7.
Tighten nuts to secure adjustment.
AdjustingtheCut-OffBar
Adjust cut-off bar to assure clippings are cleanly
discharged from the reel area:
1.
Loosen screws securing top bar (Figure 54 ) to
cutting unit.
Figure55
1.
2.
3.
Bedbaradjustingscrew
Springtensionnut
Bedbar
4.
5.
Jamnut
Bedbarbolt
2.
Back out the spring tension nut, until the washer is
no longer tensioned against the bedbar (Figure 55 ).
3.
4.
On each side of the machine, loosen the jam nut
securing the bedbar bolt (Figure 55 ).
Remove each bedbar bolt allowing bedbar to be
pulled downward and removed from machine.
Account for 2 nylon and 2 stamped steel washers
on each end of bedbar (Figure 55 ).
Figure54
1.
Cut-offbar
AssemblingtheBedbar
2.
Insert .060 inch feeler gauge between top of reel
and bar and tighten screws. Ensure bar and reel are
equal distance apart across complete reel.
1.
Install bedbar, positioning mounting ears between
washer and bedbar adjuster.
2.
Secure bedbar to each side plate with bedbar bolts
(jam nuts on bolts) and 8 washers. A nylon washer
is to be positioned on each side of side plate boss.
Place a steel washer outside each of the nylon
washers. Torque bolts to 240-320 in.-lb.
Note: The bar is adjustable to compensate for
changes in turf conditions. The bar should be
adjusted closer to reel when turf is extremely dry.
By contrast, adjust bar further away from reel when
turf conditions are wet. The bar should be parallel
to reel to ensure optimum performance and should
be adjusted whenever reel is sharpened on a reel
grinder.
3. Tighten the jam nut until the end play is removed
from the outside thrust washers. Do not
overtighten.
31
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04021, Toro 04200, Toro Greensmaster |
| Model Number | 04021, 04200 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | Nederlands, English, ελληνικά, Português, Svenska |
| Product Name | Toro Greensmaster Flex 21 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro Greensmaster - Flex Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)