ENGINE
Fuel Tank, Fuel Line and Fuel Filter
It should be gathered and secured to the ignition switch
wires. It then goes down to the primer fitting on top of the
carburetor (Fig. 009).
To remove the fuel tank, unscrew the gas cap, slip the
tank out of the shroud and install the cap. If there is
fuel in the tank, clamp the line, or drain the tank into a
suitable container. Remove the fuel line and fuel filter.
The tank is held in place by the bracket and shroud
surrounding it (Fig. 007).
Fig 009
MVC-866XA
Engine Shroud Assembly
Fig 007
MVC-000
1.
Ensure the ignition switch is in place and the wire
harness is plugged in, the primer line is attached to
the primer and the primer body is secure in its slot,
and the fuel tank, fuel line and filter are properly
installed.
Primer Line Routing
The primer line connects to the back side of the primer
then is routed over the fuel line, over the foam block
(Fig. 008).
Fig 008
MVC-865XA
Power Max Service Manual
3-3
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro Power Max 1028LE, Toro Power Max 826LE, Toro Power Max 828LE, Toro Power Max 828LXE, Toro Power Max 828OE, Toro Power Max 828OXE |
| Model Year | 2005 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)