Toro Power Max Series Snow Blower Service Manual

AUGER HOUSING
Adjusting the Skids and Scraper - Pivoting
Scraper Models
1.
Check the air pressure in the tires. They must be
between 17 and 20 psi (116-137 kPa) and the same
on both sides so the machine sets level.
2.
3.
Move the snowthrower onto a level surface.
Loosen the nuts that secure both skids to the auger
sides until the skids slide up and down easily.
4.
For use on a smooth paved surface, push down on
the handles to raise the auger. This will allow the
scraper to move fully forward. Set the auger down so
the scraper contacts the ground.
5.
Move the skids down until they contact the ground
and secure them.
Note:  If the surface that this machine will be used
on is really smooth, the skids can be raised
slightly, approximately 1/8-1/4” (3-6mm) to
increase the scraping action.
If you must use a pivoting scraper on a gravel
surface, set the skids all the way down,
raising the auger to prevent the scraper from
picking up rocks.
6.
Check to ensure the rotating part of the auger does
not touch the ground. This can damage the auger as
well as the pavement.
Power Max Service Manual
6-3
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, , , , ,
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 96 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website