CONTROLS
Auger Control
2. Loosen the jam nut. The cable is adjusted using the
turnbuckle on the lower end of the auger cable.
The bail on the right hand handle is the auger control.
Squeeze the bail and the cable causes an idler to pivot
tensioning the auger belt (Fig. 041).
Note: When rotating the turnbuckle, hold the cable
so it does not twist (Fig. 041).
3.
Remove the right side belt cover. Adjust the
turnbuckle until there is a 1/16” (1.5mm) gap
between the stop and the auger clutch assembly.
Secure the jam nut on the turnbuckle (Fig. 043).
Fig 041
MVC-816X
Auger Cable Adjustment
Fig 043
MVC-876X
1.
The auger cable adjustment should be checked after
the first 2 hours of use and annually thereafter. To
begin, ensure the auger lever is in the full up position
(Fig. 042).
Beginning with 2005 production there are two holes
in the idler arm (Fig. 044). The idler pulley is initially
installed in the outer hole. If necessary, the idler
can be moved to achieve the correct tension. 2004
models have only one hole in the idler.
Fig 042
MVC-901XA
Fig 044
MVC-016X
Power Max Service Manual
4-9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro Power Max 1028LE, Toro Power Max 826LE, Toro Power Max 828LE, Toro Power Max 828LXE, Toro Power Max 828OE, Toro Power Max 828OXE |
| Model Year | 2005 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)