AUGER GEARBOX
11.
Pull the auger forward a little, slide the pulley from
the auger gearbox input shaft and pull the key out of
the shaft. The auger assembly should pull out to the
front.
SEPARATING THE AUGER
AND TRACTION ASSEMBLIES
SECONDARY METHOD
Note: If you cannot remove the pulley from the input
shaft, it will be necessary to separate the
auger and traction assemblies to get better
access to the auger pulley. See Separating the
Auger and Traction Assemblies, page 7-4.
Should you be unable to remove the pulley from the
auger gearbox input shaft, it will be necessary to
separate the auger and traction assemblies. After
performing steps 1-7 listed above, proceed as follows:
1.
Disconnect the deflector cable from the deflector
(Fig. 084).
12.
Slide the bearing off each end of the auger shaft.
If this model has a pivoting scraper, it can now be
removed.
13.
Remove the capscrew connecting each auger to
the auger shaft and slide the auger off the shaft
(Fig. 083).
Fig 084
MVC-771X
2.
Remove the cover over the chute gears. Free the
chute latch cable from its clamp and disconnect the
chute latch cable (Fig. 085).
Fig 083
MVC-900XA
14.
The auger gearbox is now ready for disassembly
and repair.
Fig 085
MVC-774X
7-4
Power Max Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro Power Max 1028LE, Toro Power Max 826LE, Toro Power Max 828LE, Toro Power Max 828LXE, Toro Power Max 828OE, Toro Power Max 828OXE |
| Model Year | 2005 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)