Toro Power Max Series Snow Blower Service Manual

WHEEL CLUTCH
TRACTION DRIVE SYSTEM
10.
Remove pawl pins and pawls with from the 32-tooth
gear (Fig. 188 and Fig. 189).
WHEEL CLUTCH REASSEMBLY
Note:  Apply a light coat of SAE 30W oil to
intermediate shaft before assembly.
1.
Set the 32-tooth gear on a flat surface and install
pawls. Apply a light coat of oil Toro part no. 505-5
to dowel pins then install dowel pins into the pawl
assembly (Fig. 190).
Fig 188
MVC-889XWC.jpg
Fig 190
MVC-902XWC.jpg
2.
With the pawls facing up and away from the hub,
slide the retainer plate onto hub. Make sure the pins
are seated flush and the retainer plate sits flush onto
the gear (Fig. 191).
Fig 189
MVC-890XB.jpg
11.
Repair or replace defective components.
Fig 191
MVC-901XWC.jpg
9-20
Power Max Service Manual
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, , , , ,
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 96 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website