Check Auger Gearcase Oil
1
Check oil level in auger gearcase (see Service
and Adjustments).
2
3
Check Engine Crankcase Oil
IMPORTANT: The engine is shipped with
5W-30 oil in crankcase. Refer to Engine
Manual for detailed instructions.
Fill Engine Fuel Tank
Refer to Engine Manual for proper fuel type
and tank capacity.
1.
2.
Cable Eye
Flat Washer and E-Ring
Check Function of all Controls
3
. Deflector Cable
Ensure unit runs and performs properly. Refer
to Operation.
Figure 8
OS1981
Run-in Attachment Belt
Check Function of Dual Handle
Interlock
1.
Start unit in a well-ventilated area
according to Starting and Shut-Off in
Operation.
Without the engine running, press down
(engage) both clutch levers. Release
attachment clutch lever. Attachment clutch
should remain engaged until traction clutch
lever is released, then both clutches must
disengage. If they do not, contact your dealer
for repairs.
2. Engage attachment clutch lever and run
attachment for about 15 minutes.
3.
Stop unit, wait for all moving parts to stop,
and remove spark plug wire.
4.
Adjust clutch according to Attachment
Clutch/Brake Adjustment in Service and
Adjustments.
Check Tire Pressure
Check tire pressure and adjust to the pressure
listed on tire sidewall.
OPERATION
Traction Drive Clutch - Left Hand
Lever
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Squeeze the Traction
Drive Clutch Lever
2
against the Handlebar
(1) to engage wheel
drive for propelling unit.
Forward speed will vary
according to snow depth
and moisture content.
WARNING: To avoid injury to hands
and feet, always disengage clutches,
shut off engine, and wait for all
movement to stop before unclogging
or working on snow thrower.
Keep hands and feet away from auger
and impeller.
1
Release lever (2) to
stop movement.
OL2701
CONTROLS AND FEATURES
NOTE: When traveling to or from the area to
be cleared, press down on the handlebars
enough to raise the front of the unit slightly off
the surface. Engage the traction drive clutch
without engaging the attachment drive clutch.
See Figure 1 for all Controls and Features
locations.
Dual Handle Interlock
When Attachment Clutch and then Traction
Drive Clutch are engaged, the Attachment
Clutch will remain engaged (lever down) if
released. To stop attachment, release Traction
Drive Clutch and both clutches will disengage.
GB - 14
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 1124, Ariens 1128, Ariens 1332, Ariens 1336, Ariens 8524, Ariens 924118, Ariens 924121, Ariens 924122, Ariens 924332, Ariens 924505, Ariens 924506, Ariens 924508, Ariens 924551 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)