9.5
FRICTION PLATE
9.6 FRICTION PLATE HEX SHAFT
The friction plate can be removed and inspected when
the drive system, friction plate, and axle have been
removed. Refer to the appropriate sections of this
manual for more information.
To remove the shaft (Figure 24), place the unit in the
belt service position. Remove the front half of the frame
as shown in Figure 9.
1.
2.
Remove the belt from the pulley.
1.
Disconnect the friction plate return spring (Figure
24).
Unscrew the bolt from the pulley and remove the
pulley.
2.
3.
4.
Slide friction plate off the hex shaft.
Inspect for wear.
3.
4.
Remove the hub key.
Tip the frame forward and remove the drive
system, friction wheel, and friction plate. Refer to
appropriate sections of this manual for more
information.
When reassembling apply anti-seize to the shaft
before installing the friction plate.
5.
6.
Pull the shaft out of the bearing assembly.
Reassemble in reverse order.
When installing the friction plate to the hex shaft,
use anti-seize on the shaft.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Friction Plate
Bearing Assembly
Retaining Ring
Shaft Spindle
Thrust Washer
Flange Bushing
Flange Bushing
Tension Spring
Clutch Fork
10
10.Traction
Clutch
9
8
1
2
3
4
7
5
PS0342_1a
6
Figure 24
9
- 32
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 932045, Ariens 932046, Ariens 932047, Ariens 932048, Ariens 932311, Ariens 932312 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)