Maintenance and Service
1.
Before servicing or making adjustments, position
10.Shut ProCore Processor engine off before checking
or adding oil to the crankcase.
ProCore Processor on a level surface and stop engine.
Chock wheels to prevent it from moving. If machine is
attached to tow vehicle, engage tow vehicle parking
brake, stop engine and remove key from the ignition
switch.
11.
Disconnect battery before servicing the machine.
Disconnect negative battery cable first and positive
cable last. If battery voltage is required for troubleshoot-
ing or test procedures, temporarily connect the battery.
Reconnect positive battery cable first and negative
cable last.
2.
keeping all nuts, bolts and screws tight.
Make sure machine is in safe operating condition by
3.
vehicle, park Processor on a hard, level surface and
chock wheels to prevent machine movement.
Before disconnecting ProCore Processor from tow
12.Battery acid is poisonous and can cause burns.
Avoid contact with skin, eyes and clothing. Protect your
face, eyes and clothing when working with a battery.
4.
all hydraulic hoses and lines are in good condition be-
fore applying pressure to the hydraulic system.
Make sure all hydraulic line connectors are tight and
13.Battery gases can explode. Keep cigarettes, sparks
and flames away from the battery.
14.When
changing tires or performing other service,
5.
Keepbodyandhandsawayfrom pinholeleaksinhy-
use correct blocks, hoists and jacks. Make sure ma-
chine is parked on a solid level surface such as a con-
crete floor. Always chock or block wheels. Use suitable
jack stands to support the raised machine. If the ma-
chine is not properly supported by suitable jack stands,
the machine may move or fall, which may result in per-
sonal injury (see Jacking Instructions in this chapter).
draulic lines that eject high pressure hydraulic fluid. Use
cardboard or paper to find hydraulic leaks. Hydraulic
fluid escaping under pressure can penetrate skin and
cause injury. Hydraulic fluid accidentally injected into
the skin must be surgically removed within a few hours
by a doctor familiar with this form of injury or gangrene
may result.
15.If
major repairs are ever needed or assistance is de-
6.
performing any work on the hydraulic system, relieve
hydraulic system pressure.
Before disconnecting any hydraulic component or
sired, contact an Authorized Toro Distributor.
16.At
the time of manufacture, the machine conformed
to all applicable safety standards. To assure optimum
performance and continued safety certification of the
machine, use genuine Toro replacement parts and ac-
cessories. Replacement parts and accessories made
by other manufacturers may result in non-conformance
with the safety standards, and the warranty may be
voided.
7.
free of excessive grease, grass, leaves and dirt.
To reduce potential fire hazard, keep engine area
8.
If engine must be running to perform maintenanceor
to make an adjustment, keep hands, feet, clothing and
other parts of the body away from moving parts on the
ProCore Processor. Keep bystanders away.
9.
setting. Toassuresafety andaccuracy,checkmaximum
Do not overspeed the engine by changing governor
engine speed with a tachometer.
ProCore Processor
Page 1 -- 3
Safety
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)