MTD White Outdoor L Style Snow Blower Owners Manual

3
IMPORTANT: Two replacement auger shear pins are
included with this manual (or stowed in the plastic handle
panel). Refer to Augers on page 21 for more information
regarding shear pin replacement.
Setting Up
Your Snow
Thrower
1.  Observe the lower area of the snow thrower to be
sure both cables are aligned with roller guides before
pivoting handle upward.
a.  Pull up and back on upper handle as shown in
Figure 1. Align upper handle with the lower handle.
b.  Tighten hand knobs securing upper handle to
lower handle.
2.
3.
If it’s not already attached from the factory, position
the chute assembly (forward-facing) over the chute
base. See Figure 2.
a.  Insert the round end of the chute control assembly
on the short tube of the chute assembly as shown
in Figure 3.
b. Secure other end of the chute control assembly
onto the chute support bracket.
Secure the round end of the chute control assembly
to the chute assembly with wing nut provided. See
Figure 4.
NOTE: All references
in this manual to the
left or right sideof the
snowthrower isfrom
the operating position
only. Exceptions, if any,
will be specified.
4.
5.
Figure 1
Figure 2
Figure 3
Check that all cables are properly routed through the
cable guide on top of the engine. See Figure 4.
IMPORTANT
Thisunit isshipped
with the engine full of
oil. After assembly,
refer to the Tecumseh
Enginesmanual
packedseparatelywith
your snow thrower
for fuel and oil fill-up
details.
The extension cord is fastened with a cable tie to the rear
of the auger housing for shipping purposes. Cut the cable
tie and remove it before operating the snow thrower.
CAUTION: Prior to operating your snow thrower, refer
to Auger Control Test on page 11. Read and follow all
instructions carefully, and perform all adjustments
to verify your snow thrower is operating safely and
properly.
Figure 4
6
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website