English
Warning!
Warning!
Warning!
The cutting attachment continues to
rotate for a short period after the throttle
trigger is released (flywheel effect).
During cutting, check the tightness and
the condition of the cutting attachment
at regular short intervals with the engine
and attachment stopped. If the behavior
of the attachment changes during use,
stop the engine immediately, wait until
the cutting attachment stops, and check
the nut securing the attachment for
tightness and the blade for cracks, wear
and damage.
When using your edger, avoid cutting
close to fences, sides of buildings, tree
trunks, stones or other such objects that
could cause the power tool to kick out or
could cause damage to the blade.
15m
(50ft)
Warning!
If the blade or deflector becomes
clogged or stuck, always shut off the
engine and make sure the cutting
attachment has stopped before clean-
ing. Grass, weeds, etc. should be
cleaned off the blade at regular
intervals.
To reduce the risk of eye and other injury
always wear proper eye protection (see
the chapter on “Proper Clothing“) and
ensure that bystanders are at least 50
feet (15 m) away. To reduce the risk of
damage to property, also maintain this
distance from such objects as vehicles
or windows. Any coworkers who must be
in the restricted area should also wear
goggles or protective glasses. Stop the
engine immediately if you are
Warning!
A loose blade may vibrate, crack, break
or come off the edger, which may result
in serious or fatal injury. Make sure that
the cutting attachment is properly tight-
ened. Use the wrench supplied or one of
sufficient length to obtain the proper
torque. If the blade loosens after being
properly tightened, stop work immedi-
ately. The retaining nut may be worn or
damaged and should be replaced. If the
blade continues to loosen, see your
STIHL dealer. Never use an edger with
a loose cutting attachment.
Warning!
To reduce the risk of unintentional rota-
tion of the cutting attachment and injury,
always shut off the engine before
replacing the cutting attachment.
approached.
Warning!
Warning!
The gearbox becomes hot during oper-
ation. To reduce the risk of burn injury,
do not touch the gear housing when it is
hot.
Before you start work,
examine the area for
stones,glass,fencewire,
metal,trash or other solid
objects. The cutting
Warning!
Replace a cracked, bent, warped, dam-
aged, dull or worn out blade
immediately, even if damage is limited
to superficial cracks. Such attachments
may shatter at high speed and cause
serious or fatal injury.
Warning!
attachment could throw
objects of this kind.
The muffler and other parts of the
engine (e.g. fins of the cylinder, spark
plug) become hot during operation and
remain hot for a while after stopping the
engine. To reduce risk of burns do not
touch the muffler and other parts while
they are hot.
FC 56 C
9
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 56C |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)