English
N
N
Start and warm up the engine if
necessary.
Engine Management
Adjusting the Carburetor
Adjust idle speed with the idle speed
screw (LA) so that the cutting blade
does not turn.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum fuel-air
mixture under most operating
conditions.
Fine Tuning for Operation in
Mountains or at Sea Level
With this carburetor it is only possible to
make corrections with the adjusting
screws within fine limits.
A slight correction of the setting may be
necessary if engine power is not
satisfactory when operating at high
altitude or at sea level.
Standard Setting
N
Warm up the engine.
N
N
Shut off the engine.
At high altitude
Turn high speed screw (H)
clockwise (leaner) – no further than
stop.
Mount the cutting blade, check it
and clean it if necessary (it must be
clean and not warped).
N
N
N
Check the air filter and replace the
element if necessary.
At sea level
N Turn high speed screw (H) slightly
counterclockwise (richer) – no
further than stop.
Have the spark arresting screen
(not all markets) checked – see
“Inspection and Maintenance by
Dealer"
Adjusting Idle Speed
Warm up the engine.
Engine stops while idling
N
N
Turn the idle speed screw (LA)
slowly clockwise until the engine
runs smoothly – the cutting blade
must not turn.
N
N
Turn the high speed screw (H)
counterclockwise as far as stop
(max. 3/4 turn possible).
Turn the low speed screw (L)
counterclockwise as far as stop
(max. 3/4 turn possible).
2
0
FC 56 C
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 56C |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)