English
Fit a new spark plug after approx. 100
operating hours or earlier if the
electrodes are badly eroded.
Engine Running Behavior
Lubricating the Gearbox
If engine running behavior is
unsatisfactory even though the air filter
is clean and the carburetor is properly
adjusted, the cause may be the muffler.
N
Have the muffler checked for
contamination (carbonization).
2
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
1
1
Check grease level regularly, about
every 25 hours of operation.
To reduce the risk of fire and burn
injury, use only spark plugs
authorized by STIHL. Always
press spark plug boot (2) snugly
onto terminal (1) of the proper
size. (Note: If terminal has
N
Unscrew the filler plug (1). If no
grease can be seen on the inside of
the filler plug, screw the tube (2) of
STIHL gear lubricant for
detachable SAE adapter nut, it
must be attached.) A loose
connection between spark plug
boot and ignition wire connector in
the boot may create arcing that
could ignite combustible fumes
and cause a fire.
brushcutters – see "Special
Accessores" – into the filler hole.
N
N
Squeeze up to 0.2 oz (5 g) grease
into the gearbox.
Do not completely fill the gearbox
with grease.
Refit the filler plug and tighten it
down firmly.
2
2
FC 56 C
Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
---|---|
Tags | STIHL FC 56C |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)