English
forth together with the thrust
washer (4) until the pin slips into
position and blocks the shaft.
Mounting the Cutting Blade
A
N
N
N
Fit the combination wrench (5) on
the nut (6).
1
Loosen and unscrew the nut
clockwise (left-hand thread).
Remove the thrust washer.
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
7
N
Lay the power edger on its back so
that the blade mounting (1) faces
up.
10
Recommended distance (A): about 6 in
(15
cm)
6
N
Slide the handle to the required
position.
4
7
N
Tighten down the star knob so that
the handle cannot be rotated on the
drive tube.
5
9
8
6
4
2
3
N
Place the blade (7) on the thrust
plate (8).
Collar (see arrow) must engage
the blade's mounting hole.
N
N
Fit the thrust washer (4) on the
shaft (9) and block the shaft.
N
Insert the stop pin (2) or screwdriver
–
see "Special Accessories" – into
Screw the mounting nut (6) on to the
shaft counterclockwise and tighten
it down firmly.
the hole (3) as far as stop – apply
slight pressure and turn back and
If the cup spring (10) on the
nut (6) has lost its tension, fit a
new nut.
1
4
FC 56 C
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 56C |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)