STIHL FC 56C Edger Owners Manual

English
Adjusting Depth of Cut
Adjust correctly
2
1
A
N
N
Tighten down the wingnut
clockwise.
N
N
N
To reduce the risk of injury, shut
off the engine.
Standing in the normal working
position, check the depth of cut
again and correct it if necessary,
2
Loosen the wingnut (1)
counterclockwise.
3
B
Adjust the wheel (2): Upwards to
increase the depth of cut (A) or
downwards to reduce the depth of
cut (A).
The depth of cut depends on the
uneveness of the ground, your height
and the way you hold the edger. Use the
following procedure:
N
Adjust the depth wheel (2) so that
the blade (3) just touches the
ground or breaks the surface of the
soil by no more than 0.2 in
(5
mm) (B) in the normal working
position.
Do not adjust the deflector.
The deflector has been set at the factory
so that the arrow on the deflector and
the open side point away from the
operator. This ensures that cuttings and
other debris are directed away from the
machine and operator.
1
2
FC 56 C
Product Specification
CategoriesSTIHL Straight Edger Manuals, Straight Edger Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 80 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website