GAS POWER SHOVEL
FLYWHEEL REMOVAL
7.
Alternate tightening the 1/4 - 20 x 2 inch screws
into the cored holes until the seat between the
crankshaft and the flywheel is loosened (Figure
229).
1.
Remove the engine (Refer to "ENGINE
REMOVAL" on page 9 - 16).
2.
3.
4.
Remove the cooling shroud.
Remove the recoil starter assembly.
Anchor the starter cup with Toro Multi-Purpose
Tool #45-1390 and remove the flywheel nut with a
3/4” open end wrench (Figure 227).
Figure 229
0406-046
IGNITION TIMING/GOVERNOR
The Toro Gas Power Shovel is equipped with a speed
limiting capacitator discharge ignition (C.D.I.) module.
The C.D.I. module electronically performs the functions
of coil, points, and condenser as well as governing the
engine speed.
Figure 227
0406-044
5.
Tap the 2 cored flywheel holes with a 1/4 - 20 tap
(Figure 228).
To Properly Time the Engine:
1.
2.
3.
4.
Remove the engine from the snowthrower frame.
Remove the carburetor.
Remove the cooling shroud.
Loosen the C.D.I. module mounting screws.
Figure 228
0406-045
6.
Install the Toro Multi-Purpose Tool with two 1/4 -
20 x 2 inch screws so that the flat portion of the
tool is in contact with the end of the crankshaft.
Single Stage Snowthrower Service Manual
9 - 19
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)