ENGINE REMOVAL AND INSTALLATION
B. Install the crankshaft pulley. Refer to
"Crankshaft Pulley Replacement" on page 5 -
3.
3.
Remove the belt from the engine pulley and
remove the engine pulley and key if so equipped
(Figure 47).
C. Connect the spark plug lead wire.
D. Install the belt and side plate. Refer to
"Replacing Drive Belt" on page 5 - 1.
Complete Steps 5 through 7.
Chain Drive Units:
A. Install the crankshaft sprocket. Be certain to
align the keyway (slot) of the crankshaft
sprocket with the location key on the
crankshaft. Should the locating key on the
crankshaft show signs of wear, replace.
B. Install the chain. Refer to "Chain
Replacement" on page 5 - 25. Do Step 3.
Align and adjust the chain. Refer to
"Crankshaft Sprocket Replacement (all
models)" on page 5 - 21. Consult Steps 5
through 8.
Figure 47
1854-35-2
4.
Remove the two screws at the bottom of the
control panel and remove the control panel cover
(Figure 48).
C. Install left side plate and chainguard.
D. Connect the spark plug lead wire.
POWERLITE, ENGINE REMOVAL
1.
Use a pump type siphon to remove the fuel from
the fuel tank.
2.
Remove the belt cover from the left side (Figure
46).
A
Figure 48
1854-42
(A) Screws
Figure 46
1854-35
Single Stage Snowthrower Service Manual
4 - 5
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
Download File |
|
Document Type | Service Manual |
Language | English |
Serial Number | 200000001 - 200999999 |
Product Name | Toro CCR 1000 Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
Swath | 20 inch |
Discharge | Single Stage |
Engine Manufacturer | Tecumseh |
Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
Engine Motor Model # | HSK635-1721A |
Engine Motor Size | 3.5 hp |
Engine Motor Type | 2 Cycle EPA1 |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)