MAINTENANCE
Replacement
1.
2.
Remove all the mounting screws retaining the
upper shroud to the unit. Remove the shroud.
1.
Holding the vane firmly at the base, slide the base
of the vane into the small slot in the shroud
(Figure 176).
Remove eye bolt nut from eye bolt at the lower
handle (Figure 177). If the rubber grommet is
worn or missing, replace. Next, slide the vane
control rod from the small slot in the vane bracket.
Note: Sliding the vane at an angle to the slot will
ease installation.
Figure 177
0217-084
Figure 176
0217-083
3.
Remove the push-on retainer and slide the
washers and vane bracket off the carriage bolt.
Should the carriage bolt be loose, tighten.
Replace the carriage bolt and locknut if needed
(Figure 178).
2.
At the vane mount, turn the vane 90° either to the
left or right. Slide the vane into the vane mount
and turn the vane either right or left to the upright
position.
Note: The vanes to the far right and left of the
snowthrower may be retained by mounting
screws. It will be necessary to remove these
when replacing these vanes.
VANE CONTROL SERVICING ON 14” AND
21” SNOWTHROWERS FROM 1965-1967
The 14” and 21” snowthrowers produced between
1965 and 1967 were designed with a notched selector
plate. To service this design, please consult the parts
manual for your unit.
VANE CONTROL SERVICING
14” Units 1968-1980
21” Units 1968-1975
Figure 178
0217-085
Single Stage Snowthrower Service Manual
7 - 7
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)