ENGINE REMOVAL AND INSTALLATION
1965
- 1985 MODELS, ENGINE
INSTALLATION
After performing the necessary servicing procedures to
your engine, install the engine back into the unit.
Proceed with the following:
1.
Slide the engine into the engine mounting bracket.
Loosely install the four mounting nuts to retain the
engine to the mounting bracket (Figure 40).
Figure 41
0217-024
3.
Slide the fuel line or hose onto the carburetor
fitting. Compress the fuel line clamp and slide into
position.
4.
5.
On 20” models, install the lower shroud.
Install the switch terminal back onto the switch if
your unit is so equipped. (On some 1980 S-200
models, the key switch has pig tail leads running
to a receptable. This receptable should be
connected to the terminal.)
Figure 40
0217-023
6.
7.
Install the choke linkage and choke control. Take
care not to bend or misform the choke control
linkage.
2.
Install the engine mounting bracket that supports
the engine on the starter housing side. Loosely
install the starter housing nut (Figure 41). Tighten
the engine mounting bracket to the frame.
Slide the primer hose onto the primer fitting.
Note: On all 20” snowthrowers, install the small
self-tapping screw retaining the vane control rod
to the vane bracket. Refer to your parts manual if
additional guidance is necessary.
Single Stage Snowthrower Service Manual
4 - 3
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)