DRIVE SYSTEMS
B. Slide the end cap/shaft assembly from the
bearing (Figure 75). If, upon your inspection,
noticeable wobble exists between the end cap/
shaft assembly and the bearing, both should
be replaced.
7.
Assemble both paddles to the rotor halves.
Torque each screw 15 in·lbs (Figure 76). Lastly,
tighten the four self-tapping rotor location screws.
(CAUTION: Do not overtorque screws, the
threads may be damaged.)
Figure 76
0217-048
8.
9.
Replace rotor pulley. Be certain to replace both
the spacer and washer, before turning the rotor
pulley onto the shaft (counterclockwise). Tighten
the rotor pulley finger tight (Figure 72). The
rotation of the pulley during the operation of the
unit will tighten the pulley to the proper torque.
Figure 75
0217-047
Note: Often if the bearing should seize, heat is
generated. The heat will cause the bearing and shaft
to become blue in color. Again, both the end cap/shaft
assembly and bearing should be replaced.
Replace belt. Refer to "Replacing Drive Belt" on
page 5 - 1. Complete steps 5 through 7.
C. To remove the bearing from the L. H. side
plate, drill out three pop rivets retaining the
bearing in the bearing retainer or flange (Figure
75). Replace the bearing and the bearing
retainer. Use pop rivets (Toro P.N. 3292-7) to
reassemble.
Note: A pop rivet gun can be obtained through
many hardware stores in your area.
D. Replace the end cap/shaft assembly.
6.
Assemble rotor halves. To locate the rotor halves
into the correct position in the end plates, loosely
install the four self-tapping location screws (Figure
73).
5 - 8
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)