ELECTRIC START SYSTEM (12 VOLT)
Starter Assembly
5. Reassemble pinion/clutch assembly. Apply a small
amount of Lawn-Boy “AX” grease to the pin. Slide
the assembly on to the pin with the drag spring (A)
1.
2.
3.
Apply a light coat of Lawn-Boy “AX” grease to the
pinion gear, thrust washer, and driven gear prior to
installation.
over the stud. (See Figure 102.)
A
Place the pinion gear on small driveshaft in motor
housing with either side facing up. (See Figure
101.)
Place the thrust washer then the driven gear on the
pin. Make sure the raised side of the driven gear is
facing the cover plate.
Figure 102
1657.020
Starter Installation
1.
2.
Install the starter leaving the bolts loose.
Using a feeler gauge, gap the end of the pinion/
clutch assembly away from the engine .019” to
.021”
(48 mm to .53 mm). While keeping this air
gap, tighten the Allen head bolt first, then the lower
mounting bolt.
Figure 101
1657-013.tif
4.
Install the cover plate with the word “OUT” facing
the pinion/clutch assembly and secure with two
screws and drag spring stud. Make sure you
replace the drag spring stud in its original position.
Torque screws and stud to 20 in. lbs.
3. Plug the wiring connector in and install the shrouds
and fuel tank.
55
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 3650 GTS, Toro 38409, Toro 38412, Toro 38413, Toro 38414, Toro 38418, Toro 38419, Toro 38422, Toro 38424, Toro 38428, Toro 38429, Toro 38432, Toro 38433, Toro 38437, Toro 38438, Toro 38440, Toro 38441, Toro 38442, Toro 38445, Toro 38515, Toro 38516, Toro 38517, Toro 38518, Toro 38537, Toro 38538, Toro 38600, Toro 38601, Toro 38602, Toro 38603, Toro 38610, Toro 38611, Toro CCR 2400, Toro CCR 2400 GTS, Toro CCR 2450 GTS, Toro CCR 2500 GTS, Toro CCR 3000, Toro CCR 3000 GTS, Toro CCR 3650 GTS, Toro Power Max 6000, Toro Power Max 726TE, Toro Snow Commander |
| Model Number | 38412, 38418, 38413, 38419, 38422, 38424, 38440, 38428, 38429, 38432, 38433, 38437, 38438, 38439, 38440, 38441, 38442, 38445, 38515, 38537, 38538, 38600, 38601, 38602, 38603, 38610, 38611, 38419, 38516, 38517, 38518 |
| Model Year | 1999, 2000, 2001, 2002, 2004, 2005, 2007 |
| Download File |
|
| Document Type | Engine Service Manual |
| Language | English |
| Serial Number | 240000001 - 240999999 |
| Product Name | Toro Snow Commander Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Single Stage, Single Stage Snow Commander |
| Swath | 24 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 7 hp |
| Engine Motor Type | 2 Cycle EPA2 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)