Use a fuel stabilizer/conditioner regularly during
operation and storage. A stabilizer/conditioner cleans the
engine during operation and prevents gum–like varnish
deposits from forming in the engine during storage.
1
2
3
4
IMPORTANT: Do not use fuel additives other than a
fuel stabilizer/conditioner. Do not use fuel stabilizers
with an alcohol base such as ethanol, methanol, or
isopropanol.
6
1.
2.
3.
Clean the area around the fuel tank cap (Fig. 13).
Remove the cap from the fuel tank.
5
Using unleaded, regular gasoline, fill the tank to
within 1/4 to 1/2 in. (6 to 13 mm) from the top of the
tank.
IMPORTANT: Do not fill the tank with gasoline into
the filler neck. This space is for expansion of fuel. Do
not fill the tank completely full.
879
M-879
Figure 14
4.
5.
Install the fuel tank cap.
1.
2.
3.
Auger drive control lever
Traction control lever
Speed selector
4.
5.
6.
Discharge chute control
Fuel shut-off valve
Wipe up any spilled gasoline.
Chute deflector handle
Operation
•
•
•
Choke (Fig. 15)—Rotate the choke to the Full choke
position to start a cold engine. As engine warms up,
move choke gradually to Off.
Controls
Primer (Fig. 15)—Press the primer to pump a small
amount of gasoline into the engine for improved cold
weather starting.
The following list contains descriptions of the
snowthrower controls:
•
Auger/Impeller Drive Control Lever (Fig. 14)—To
engage both the auger and impeller, press the lever
against the right handgrip. To disengage, release the
lever.
Throttle (Fig. 15)—Move the throttle upward to
increase engine speed and downward to decrease
engine speed.
•
•
Recoil Starter (Fig. 15)—Pull the recoil starter to start
the engine.
•
•
Traction Control Lever (Fig. 14)—To engage the
traction (wheel drive), press the lever against the left
handgrip. To stop traction, release the lever.
Ignition Switch (Fig. 15)—Insert the key before
starting the engine. To stop the engine, remove the
key.
Speed Selector (Fig. 14)—This control has four
positions: one reverse and three forward speeds. To
change speeds, move gear the shift to the desired
position. The lever locks in a notch at each speed
selection.
1
2
•
•
•
Discharge Chute Control (Fig. 14)—Rotate the
discharge chute control clockwise to move the
discharge chute to the left and counterclockwise to
move the chute to the right.
5
4
Fuel Shut-off Valve (Fig. 14)—Close the valve by
rotating it to the right to stop fuel flow from fuel tank.
Open the valve by rotating it to the left. Close the
valve when you do not use the snowthrower.
3
725
Figure 15
1.
2.
3.
Choke
Primer
Throttle
4.
5.
Recoil starter
Ignition switch
Chute Deflector Handle (Fig. 14)—Move the
deflector handle forward to move the snow stream
down and rearward to move the snow stream up.
12
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38051, Toro 522 |
| Model Number | 38051 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 000000001 - 000999999, 200000001 - 200999999 |
| Product Name | 522 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HSSK50-67401S |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)