DESCRIPTION
QTY.
USE
Capscrew
1
1
1
1
1
Locknut
Pyramidal washer
Carriage bolt
Bracket
Installing the chute control rod
Carriage bolt
Rubber washer
Friction plate
Large flat washer
Curved washer
Locknut
1
1
1
1
1
1
Securing the chute deflector
Key
1
Starting and stopping the engine
Installing the Handle
1.
Remove the tie straps that secure the control rods to
the handle.
1
3
4
2.
Remove the axle pins from both wheels and slide the
wheels outward on the axle approximately one inch
(2.5 cm) to make room for assembling the handles
(Fig. 2).
2
5
654
1
Figure 3
2
1.
2.
3.
Traction rod
Loop
4.
5.
Flange nut
Locking flange nut
Lower traction rod
4.
Position the left handle against side of the
3
snowthrower and insert the end of the traction rod
through the loop in the lower traction rod (Fig. 3).
653
5. Align the left handle mount holes with the holes in the
left side plate, and secure the handle with two
capscrews and curved washers until they are finger
tight (Fig. 2).
Figure 2
1.
2.
Handle
3. Axle pin
Note: The concave side of the curved washer goes against
the outside of the handle.
Capscrews and curved
washers
6.
Align the right handle mount holes with the holes in
the right side plate, and secure the handle with two
capscrews and curved washers until they are finger
tight.
3.
Thread a flange nut (not the locking flange nut) with
the flange down onto the traction control rod attached
to the left handle (Fig. 3)
7.
Ensure that the handles are at the same height, then
tighten the handle fasteners securely.
7
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38051, Toro 522 |
| Model Number | 38051 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 000000001 - 000999999, 200000001 - 200999999 |
| Product Name | 522 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HSSK50-67401S |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)