6
1
3
3
2
651
1
Figure 23
1.
2.
Skid
3.
Flange nuts
5
Auger side plate
4
2
664
5.
Support the auger blades so that both the scraper and
the auger blades (Fig. 24) clear the level surface by
1/8 in. (0.3 cm).
Figure 22
1.
2.
3.
4.
Traction drive belt
5.
Large auger/impeller
pulley
Auger/impeller drive belt
Belt guide
6.
Engine pulley
3
Idler pulley
7.
8.
9.
Adjust the belt guide so that there is 1/8 in. (0.3 cm) of
clearance between the belt and the guide, and secure
the belt guide.
2
Check and adjust the belt as instructed in steps 4
through 7 of Installing the Auger/Impeller Drive
Control Linkage on page 9.
2
Install the belt cover.
Adjusting the Skids and the
Scraper
1
652
Figure 24
Concrete and Asphalt Surfaces
1.
2.
Scraper
3. Auger blades
1.
Pull the wire off of the spark plug and ensure that the
wire does not contact the spark plug.
Mounting screws
2.
Check the tire pressure in both tires to ensure that they
are inflated equally between 7 and 15 psi
(48–103 kPa).
Note: The scraper should be higher above the pavement if
the pavement surfaces are cracked, rough, or uneven.
6.
Check the scraper adjustment. The scraper should be
1/8 in. (0.3 cm) above and parallel to the level surface.
3.
4.
Move the snowthrower to a level surface.
Loosen the four flange nuts that secure both skids to
the auger side plates (Fig. 23) until the skids slide up
and down easily.
7. To adjust the scraper, loosen the five screws (Fig. 24),
level the blade, and tighten the five screws.
8.
Move the skids down to sit flat on the ground and
tighten the four flange nuts that secure both skids to
the auger side plates (Fig. 23).
Gravel Surfaces
1.
Pull the wire off of the spark plug and ensure that the
wire does not contact the spark plug.
2.
Loosen the four flange nuts that secure both skids to
the auger side plates (Fig. 23).
20
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38051, Toro 522 |
| Model Number | 38051 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 000000001 - 000999999, 200000001 - 200999999 |
| Product Name | 522 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HSSK50-67401S |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)