Toro GTS 200 Overhead Valve Engine Lawn Mower Service Manual

Carburetor Cleaning Recommendations
3.   Lay throttle plate on shaft with numbers facing out and
install screw, Fig. 27. Use a new patchlock screw, or use
Loctite to secure screw in place.
1.
2.
3.
Disassemble carburetor.
Remove all old gaskets, seals and sealing material.
2
Use commercial carburetor cleaning solvents to clean
carburetor parts and body.
1
3
4.
When cleaning non-metallic parts (plastic, nylon,
Minlon, etc.), do not leave in commercial carburetor
cleaner bath more than 15 minutes.
Note: Parts containing rubber, such as seals, “O” rings or
pump diaphragms should never be placed in commercial
carburetor cleaner bath.
5.
Use only compressed air (blowing in both directions) to
clean out all openings and passages.
Fig. 27 – Installing Throttle Shaft
1.
2.
Numbers
3.   Foam washer
Note: Do not use wires, drills or any other devices to clean out
Throttle shaft
metering holes or passages.
Assemble Carburetor
Install Inlet Needle Seat
Install Welch Plug
Install inlet needle seat with groove down using Briggs &
Stratton Tool #19057, Bushing Driver, until seated, Fig. 28.
1.
Install welch plug(s) with pin punch slightly smaller than
outside diameter of plug, Fig. 26.
1
1
2
2
Fig. 26 – Installing Welch Plug
Fig. 28 – Installing Inlet Needle Seat
1.
Welch plug
2.   Pin punch
1.
Bushing driver tool
#19057
2.   Groove
2.
3.
Press in until plug is flat. Do not cave in plug.
After plug is installed, seal outside edge of plug with
fingernail polish or non-hardening sealant.
Install Inlet Needle and Float
1.
2.
3.
Install inlet needle on float and install assembly on
carburetor body.
Install Throttle Shaft
Insert float hinge pin and center pin between float pin
bosses. Float height is non-adjustable.
1.
2.
Install throttle shaft and foam washer.
Turn shaft until flat is facing out.
Install rubber gasket on carburetor and lay float bowl on
body.
Carburetion
20
GTS 200
Product Specification
CategoriesLawn Mower Manual, Parts and Accessories Manuals, Toro Lawn Mower Manual
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 62 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website