Lubrication
2
Contents
1
Extended Oil Fill and Dipstick . . . . . . . . . . . . . . . . . . . . . .
Breather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove Breather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install Breather Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspect Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install Pump Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install Oil Filter Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .
47
47
47
47
47
48
48
48
48
3
Extended Oil Fill and Dipstick
1
Fig. 111 – Removing Breather and Breather
Passage Cover
The GTS 200 uses a plastic extended oil fill tube and a quarter
turn screw-on-dipstick.
1.
2.
Gasket
3. Breather
Dipstick oil fill tube is pressed into crankcase cover.
Breather passage cover
1
Install Breather Valve
2
1.
Install new breather passage gasket and breather passage
cover on cylinder channel and torque four (4) screws to
30 in. lbs. (3.0Nm).
2.
Place new breather gasket and breather on cylinder and
install two (2) screws torquing screws to 65 in. lbs.
(7.0Nm), Fig. 111.
3
Fig. 110 – Oil Fill and Dipstick
Gaskets do not require any sealant.
1.
2.
Dipstick
3. “O” ring
Oil fill tube
Remove Oil Pump
(on models so equipped)
Breather
1.
2.
3.
Oil pump can be removed without removing sump from
engine.
The GTS 200 engine uses a breather valve to control and
maintain a partial vacuum in the crankcase.
Remove three screws and remove pump cover and “O”
ring, Figs. 112 and 113.
The breather valve is a fiber disc or reed valve which closes
on the piston’s up stroke and opens on the piston’s down
stroke to keep a partial vacuum in the crankcase.
Carefully remove inner and outer rotors.
1
This partial vacuum prevents oil leakage past piston rings,
valve guides, oil seals, governor lever shaft and gaskets.
Remove Breather
1.
Before breather can be removed, remove fuel tank,
extended oil fill tube, blower housing, flywheel, and
muffler.
Fig. 112 – Removing Pump Cover
2.
3.
Remove two screws holding breather to cylinder, Fig. 111.
1.
Oil pump cover
Remove four screws holding breather passage cover and
gasket, Fig. 111.
GTS 200
47
Lubrication
| Categories | Lawn Mower Manual, Parts and Accessories Manuals, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro GTS 200 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)