4.
Attach RED test clip to output terminal, Fig. 108.
Adjust Stator Air Gap
1.
2.
3.
Stator air gap is 0.010” (.25mm).
2
1
Rotate flywheel until magnets are away from stator.
Loosen both stator mounting screws and move stator away
from flywheel and tighten one screw.
4.
5.
Place a 0.010” (.25mm) thick gauge between stator and
flywheel.
3
Turn flywheel until magnets are under stator. Loosen
screw and let stator be pulled against flywheel magnet.
6.
7.
Torque mounting screws to 25 in. lbs. (2.8Nm).
Turn flywheel to remove gauge, Fig. 109.
Fig. 108 – Testing Alternator Output
1.
2.
Connector
Black lead
3. Red lead
5.
6.
7.
Attach BLACK test clip to charging lead that was
disconnected at the connector.
With engine running at least 2800 RPM, output should be
no less than 0.5 amp DC.
If low or no output, check stator air gap, Fig. 109.
2
1
Fig. 109 – Adjusting Air Gap
1.
0.010” (.25mm) gauge
2. 25 in. lbs. (2.8Nm)
8.
If stator air gap is within specification and there is low or
no output, replace stator.
Install Stator Studs
If stator studs were removed, install and torque to 30 in. lbs.
(3.4Nm), Fig. 109.
Alternator
46
GTS 200
| Categories | Lawn Mower Manual, Parts and Accessories Manuals, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro GTS 200 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)