Assemble Rewind Starter
2. Install retainer making sure that slots in retainer engage
tabs on pulley, Fig. 79.
Install Pulley and Spring
2
1.
2.
Lay starter housing on work bench.
Assemble starter pulley to center pivot post in housing,
Fig. 76.
3
1
4
1
2
Fig. 76 – Installing Pulley
Fig. 79 – Installing Retainer and Screw
1.
Pulley
2.
Center pivot post
1.
2.
Slot
3.
4.
Retainer
Tab
Torque screw to 70 in. lbs.
(8.0Nm)
3.
Rotate pulley counterclockwise until slight resistance is
felt, indicating that spring is engaged in spring tab in
housing, Fig. 77.
3.
4.
Hold retainer down and install retainer screw. Torque screw
to 70 in. lbs. (8.0Nm)
While holding retainer, rotate pulley to extend and retract
pawls. If they do not extend and retract, remove retainer
and install again.
Wind Spring and Install Rope
1
1.
Turn pulley counterclockwise until spring is wound tight,
Fig. 80.
Fig. 77 – Engaging Spring
3
1.
Counterclockwise
4
1
Install Pawls and Retainer Assembly
2
1.
Position pawls over posts in pulley and install, Fig. 78.
2
1
Fig. 80 – Winding Spring
1.
2.
Starter housing eyelet
Pulley rope hole
3.
4.
Counterclockwise
Clockwise
Fig. 78 – Installing Pawls
2. Then rotate pulley clockwise until rope hole in pulley is in
line with starter housing eyelet and hold pulley, Fig. 80.
1.
Posts
2. Pawls
Rewind Starter
36
GTS 200
| Categories | Lawn Mower Manual, Parts and Accessories Manuals, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro GTS 200 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)