Removal
Installation
1.
stop engine, engage parking brake, and remove key
from the ignition switch.
Park machine on a level surface, lower cutting units,
1. Positionwheelmotortobrakeassemblymakingsure
that arrows on the side of motor case point upward.
2.
Align splines on motor shaft and splined brake shaft.
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the General Precautions for Removing and
Slide motor into brake assembly.
3.
and flat washers. Tighten cap screws from 75 to 85 ft--lb
(101 to 115 N--m).
Secure motor to brake assembly with cap screws
NOTE: To ease reassembly, tag the hydraulic hoses to
show their correct position on the wheel motor. Also,
clean the port area of the motor before disconnecting
the hydraulic lines.
4.
Remove plugs from motor ports. Attach hydraulic
hoses and tubes to wheel motor.
5.
Traction Unit Operator’s Manual).
Fill reservoir with hydraulic fluid as required (see
3.
motor. Put caps or plugs on motor ports to prevent con-
tamination.
Disconnect hydraulic hoses and tubes from wheel
IMPORTANT: Support wheel motor to prevent mo-
tor from falling during removal.
4.
Remove wheel motor using Figure 74 as a guide.
Groundsmaster 4500--D/4700--D
Page 4 -- 85
Hydraulic System (Rev. A)
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 4500 D, Toro Groundsmaster 4700 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)