Toro 02104SL Rev D Groundsmaster 4500 D 4700 D Service Manual

Removal (Fig. 93)
Park machine on a level surface, lower cutting units,
stop engine,  engage parking  brake, and remove  key
from the ignition switch.
1.
#4
Deck
#1 Deck
#5 Deck
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
NOTE:  Before disconnecting the hydraulic lines, clean
the port area of the steering valve assembly.
#
2
#3
Deck
#
6 Deck
#7 Deck
(GM4700)
Deck
(GM4700)
NOTE:  To ease reassembly, tag the hydraulic hoses to
showtheircorrectpositionontheliftcylinder.Also,clean
hydraulic fittings and hose ends prior to disconnecting
the hoses.
3.
4.
cure the cylinder pin (2) to the lift arm. Remove pin from
lift arm and cylinder shaft clevis.
Disconnect hydraulic hoses from lift cylinder.
CUTTING DECK LOCATIONS
Figure 94
Remove flange head screw and flange nut that se-
5.
Remove cylinder pin from the frame and cylinder barrel
clevis.
Remove one retaining ring from the cylinder pin (8).
6.
Remove lift cylinder from machine.
Installation (Fig. 93)
Position cylinder barrel clevis toframeand insertcyl-
1.
inder pin (8) with one retaining ring installed through the
frame and cylinder clevis.  Secure pin with second re-
taining ring.
2.
shaftclevis.Securepintoliftarmwithflangeheadscrew
and flange nut.
Insertcylinderpin(2)throughtheliftarmandcylinder
3.
Attach hydraulic hoses to lift cylinder.
4.
Fill reservoir  with hydraulic  fluid as  required (see
Traction Unit Operator’s Manual).
5.
verify that hydraulic hoses and fittings are not contacted
by anything.
After assembly is completed, operate lift cylinder to
Groundsmaster 4500--D/4700--D
Page 4 -- 109
Hydraulic System (Rev. A)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 274 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website