Toro 92784SL Rev E Service Manual Greensmaster 3100 3050 Preface Publications Service

Bedbar Adjuster Service
9
6
8
5
7
4
2
3
12
11
10
2
1
Figure 12
1.
2.
3.
4.
Adjuster shaft
Flange bushing
Cutting unit frame
Wave washer
5.
6.
7.
8.
Jam nut
9.
Cap screw
Adjuster screw
Detent
10.  Washer
11.  Spring
12.  Lock nut
Lock washer
Removal (Fig. 12)
Installation (Fig. 12)
1.
tion of this manual).
Remove bedbar (see Bedbar Removal in this sec-
1.   If the detent (7) was removed, install the cap screw
(9) and secure detent to the cutting unit frame with cap
screw and lock washer.
2.
Remove locknut (12), spring (11), and washer (10)
from adjuster screw.
2.   If  flange bushings (2) were removed, align  key on
bushing to slot in frame and install bushings.
3.
4.
juster shaft and remove adjuster shaft from cutting unit
frame.
Unscrew adjuster (6) from the adjuster shaft (1).
Remove jam nut (5) and wave washer (4) from ad-
3.
juster shaft (1) and slide into flange bushings in cutting
unit frame.
Apply antiseize lubricant on internal threads of ad-
4.
lent to the  threads of the jam  nut (5). Tighten jam  nut
from 15 to 20 ft–lbs (20 to 27 Nm).
Install wave washer (4). Apply Loctite 242 or equiva-
5.
ry.
Inspect flange bushings (2) and remove if necessa-
6.
ting unit frame by removing the cap screw (9) and lock
washer (8).
If the detent (7) is damaged, remove it from the cut-
5.
Screw adjuster (6) into adjuster shaft.
6.   Install  washer (10), spring  (11), and  lock nut (12)
onto adjuster screw.
7.
Install bedbar (see Bedbar  Installation in this sec-
tion of this manual).
8.
Adjust  cutting  unit  (see  Cutting  Unit  Operator’s
Manual).
Dual Point Adjust Cutting Units
Page 10 - 12 Rev. D
Greensmaster 3100
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 234 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website