Toro 92784SL Rev E Service Manual Greensmaster 3100 3050 Preface Publications Service

Wheel Motor Removal and Installation (Fig. 36)
Figure 36
1. Put blocks on each side off opposite drive wheel. Lift
the frame with a jack and use blocks or a jack stand to
support the frame.
5. Remove four (4) capscrews (Item 9) and lock nuts
(Item 19) to remove wheel motor (Item 22) and brake
brackets (Item 12) from frame.
2.
(Item 3). Remove large nut (Item 4) from wheel hub
(Item 5).
Remove  wheel  nuts  (Item  29)  and  remove  wheel
6. Reverse steps 1 - 6 to install the wheel motor. Tighten
nut (Item 4) to a torque of 250 - 400 ft-lb.
IMPORTANT: When disassembling hydraulic lines
make sure hydraulic plugs are placed in the open
end of the hydraulic line to prevent foreign debris
from contaminating hydraulic oil. It is also a good
idea to tag the hydraulic lines when disassembling
so they can be properly reassembled. Keep all hy-
draulic  lines  clean  and  free  from  foreign  debris.
During replacement of wheel motor, avoid overtight-
ening fittings. Check hydraulic lines for   cracks or
breaks. If a hydraulic leak should appear after re-
placement of lift cylinder, replace the fitting or line
that is leaking. Check hydraulic reservoir for level
of hydraulic fluid after replacement of lift cylinder.
IMPORTANT: To prevent damage to wheel motor, DO
NOT hit wheel hub with a hammer during removal
or installation.
3.
Mount  a  wheel  puller  to  wheel  mount  studs  and
remove wheel hub (Item 5) and brake drum (Item 6).
Remove key (Item 11) from wheel motor shaft.
4.
Disconnect  hydraulic  lines  from  fittings  on  wheel
motor (Item 22). Put caps on open lines and fittings to
prevent contamination.
Repairs
Page 4 - 54
Greensmaster® 3100
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 234 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website