7. Be careful when disassembling. The needle bearings
in the body assembly (Item 15) may be of the loose
grease retained type. Pack these with general purpose
grease to retain them for reassembly. It is recommended
NOT to remove the bearing races from the flange as-
sembly.
11. Assemble pump sections starting at the body as-
sembly (Item 15). Install woodruff keys (Item 19) and
align keyways in gears as they are installed over the
shafts. Apply grease to new seal rings (Item 23) before
installing.
12. After pump has been assembled, tighten locknuts
by hand. Rotate the drive shaft to check for binding.
Protect the shaft if using a pliers.
8.
(Items 17 and 23) as the pump is disassembled.
Remove and discard the oil seal and seal rings
9.
Clean all parts. All parts must be check for burrs,
13. Tighten the locknuts evenly in a crossing pattern to
a torque of 17 to 19 ft-lb.
scoring, nicks, etc. Check the bushings in the plate
assemblies (Items 22, 26 and 28) and cover assembly
(Item 31) for excessive wear or scoring. Replace the
assemblies as necessary. The bushings are not serv-
iceable.
14. Before installing oil seal (Item 17) put seal protector
on pump shaft or apply tape on the shaft.
15. Before installing fill volume between lips of new seal
with Master Lubricant Co. “Lubrico M-6”, Lubriplate
“Aero Lube” or equivalent. Apply grease to inside diame-
ter of new oil seal. Carefully install a new oil seal.
Assemble spring loaded lip of seal toward bearing.
10.
Stone gears if plate surfaces appear scored. Re-
place gears as sets if necessary. Oil the inside of gear
plates (Items 14, 25 and 30) and insert gear sets,
maintaining the original timing and locations.
Repairs
Page 4 - 44
Greensmaster® 3100
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3050, Toro Groundsmaster 3100 |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)