Toro 92784SL Rev E Service Manual Greensmaster 3100 3050 Preface Publications Service

Wheel Motor Repair (Fig. 37, 38)
Figure 37
Disassembly of Motor (Fig. 37)
5.  Remove  commutator  ring  (Item  23),  commutator
(Item 16), and manifold (Item 22).
1.
Place motor in a vise, clamping down on housing
(Item  3)  port  bosses  with  coupling  shaft  (Item  11)
pointed down.
6. Remove commutator seal (Item 15) from commutator
(Item 16), using an air hose to blow air into ring groove
until  seal  ring  is  lifted  out  and  discard  seal.  Inspect
commutator and commutator ring for cracks or burrs.
Inspect  commutator   for  wear,   scoring,  spalling   or
brinelling. If any of these conditions exist, replace com-
mutator and commutator ring as a matched set.
CAUTION
If motor is not firmly held in the vise, it could
be dislodged during the service procedures,
causing personal injury.
7.
Remove  manifold  (Item  22).  Inspect  manifold  for
cracks, surface scoring, brinelling or spalling. Replace
manifold that shows any of these conditions. A polished
pattern on the ground surfaces from commutator or rotor
rotation is normal.
2. Remove the seven (7) special bolts (Item 14) using a
9/16
inch thin wall socket. Inspect bolts for damaged
threads, or sealing ring under bolt head. Replace dam-
aged bolts.
8. Remove rotor set (Item 19, 20, 21) and wear plate
(Item  18).  Retain  rotor  set  in  its  assembled  form  to
maintain the same rotor vane to stator contact surfaces.
Inspect rotor set in its assembled form for nicks, scoring,
or spalling, on any surface and broken or worn rotor
splines. If any rotor set component requires replace-
ment, the complete rotor set must be replaced as it is a
matched   set.  Inspect   the   wear  plate   for  cracks,
brinelling, or scoring.
3. Remove end cover assembly (Item 24) and seal ring
(Item 5).
4. Thoroughly wash cover in solvent and blow dry. Make
sure  cover  valve  apertures,  including  internal  orifice
plug, are free of contamination. Inspect end cover for
cracks and the bolt head recesses for good bolt head
sealing surfaces. Replace cover as necessary.
Greensmaster® 3100
Page 4 - 55
Repairs
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 234 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website