While Doing Maintenance, Troubleshooting, Testing, Adjustments or Repairs
26. Before servicing or making adjustments to the ma-
chine, stop the engine, remove key from ignition switch
and pull wires off spark plugs to prevent accidental
starting of the engine.
33. Do not overspeed the engine by changing governor
settings. Maximum governed engine speed should be
2850 rpm.
34. Shut engine off before checking or adding oil to the
engine crankcase.
27. Make sure the entire machine is properly maintained
and in good operating condition. Frequently tighten all
nuts bolts. and screws.
35. Be sure you understand a service procedure before
working on the machine. Unauthorized modifications to
the machine may impair the function, safety and life of
the machine. If major repairs are ever needed, or assis-
tance is desired, contact your TORO Distributor.
28. Make sure all hydraulic line connectors are tight and
all hydraulic hoses and lines are in good condition
before applying pressure to the system.
29. Keep body and hands away from pin hole leaks or
nozzles that eject high pressure hydraulic fluid. Use
cardboard or paper to find hydraulic leaks. Hydraulic
fluid escaping under pressure can penetrate the skin
and cause injury. Fluid accidentally injected into the skin
must be surgically removed within a few hours by a
doctor or gangrene may occur.
36. Wear safety glasses, goggles or a face shield to
prevent possible eye injury when using compressed air
for cleaning or drying components.
37. When changing attachments or performing other
service, use the correct blocks and hoists. Always use
jackstands to safely support the machine when it is
raised by a jack or hoist.
30. Before disconnecting or performing any work on the
hydraulic system, all pressure in system must be re-
lieved by stopping engine and lowering cutting units and
attachments to the ground.
38. Do not use your hand to prevent cutting unit reel
from turning while servicing; this can result in personal
injury. Use a 1/2 in. thick x 3 in. wide x 8 in. long piece
of hardwood inserted into front of cutting unit between
reel blades.
31. To reduce potential fire hazard, keep engine area
free of excessive grease, grass, leaves and dirt. Do not
use flammable solvents for cleaning parts. Do not use
diesel fuel, kerosene or gasoline.
39. For optimum performance and safety, use genuine
Toro replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous and my void the product warranty
of The Toro Company.
32. If the engine must be running to perform an inspec-
tion or procedure, use extreme caution. Always use two
people, with the operator at the controls able to see the
person doing the inspection or procedure. Keep hands,
feet, clothing, and body away from cutting units and
other moving parts.
Greensmaster® 3100
Page 1 - 3
Safety Instructions
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 3050, Toro Groundsmaster 3100 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)