9.
Using a straight edge across the face of the drive
0.180”
to 0.240”
pulley on brush shaft, verify drive belt alignment across
drive and driven pulleys. Move corner shaft pulley so
that drive belt and straight edge are aligned indicating
correct position of pulley on corner shaft.
FRONT
(4.6
to 6.0 mm)
1
10.Tighten
two(2)setscrewstosecurepulleytorotating
corner shaft.
11.
still correct. If needed, re--adjust pulley location on cor-
ner shaft.
Using a straight edge, check that belt alignment is
2
3
12.Adjust
drive belt idler pulley to achieve proper ten-
sion on drive belt (see Operator’s Manual).
BRUSH AND
HOUSING ASSEMBLY
IMPORTANT: After adjusting belt tension, check
that the faces of the idler, drive and driven pulleys
areallinalignment (Fig.36).Thisisnecessarytoen-
sure that idler pulley is correctly aligned to drive
belt. If necessary, re--adjust positions of drive and
driven pulleys to allow correct alignment.
Figure 37
1.
2.
Rotating corner shaft
Scraper plate
3. Brush
13.Check
that the distance from the rotating corner
shaft to the scraper plate is from 0.180” to 0.240” (4.6 to
mm) across the entire corner shaft (Fig. 37). If nec-
6.0
essary, loosen fasteners that secure scraper plate to
machine and adjust scraper plate location.
14.Install
belt covers to machine (see Drive Belt Covers
in this section).
Chassis
Page 6 -- 30
ProCore Processor
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)