Removal (Fig. 19)
Park ProCore Processor on a level surface with the
Processor fully lowered. Make sure that Processor en-
gine is off. Remove key from the ignition switch. Chock
wheels to prevent movement of the machine.
10.Label right and left side of the chopper assembly for
installation purposes. Remove chopper assembly from
machine by lifting it up and toward the rear of the ma-
chine.
1.
CHOPPER
AXLE
2.
Removal in this section).
Remove rear cover from machine (see Rear Cover
RIGHT
FRONT
3.
(Figs. 20 and 21) (see Drive Belt Covers in this section).
Remove belt covers from both sides of chopper axle
4.
On both sides of machine, remove drive belts from
chopper axle pulleys:
A. Loosen lock nut that secures drive belt idler pul-
ley. Position idler pulley away from drive belt(s).
BRUSH
SHAFT
B. Carefully remove drive belt(s) from pulley on
chopper axle.
ROTATING
CORNER
SHAFT
JACK
SHAFT
5.
Remove pulley and taper lock bushing from left end
of chopper axle (see Pulley Assembly Service in this
section).
Figure 20
6.
14)
Remove two (2) set screws that secure pulley (item
to right end of chopper axle. Slide pulley from shaft.
Locate and retrieve square key (item 16).
7.
secure reinforcing ring (item 8) to chopper housing (Fig.
Remove four (4) screws, washers and lock nuts that
22).
Remove reinforcing ring.
CAUTION
CHOPPER
AXLE
FRONT
To prevent personal injury, make sure that chop-
per assembly is properly supported as it is re-
moved from the machine. Chopper assembly
weighs approximately 125 pounds (57 kg).
RIGHT
BRUSH
SHAFT
Figure 21
8.
Support chopper assembly to prevent it from shifting
or falling.
9.
plate:
On both sides of machine, remove bearing and end-
1
A. Loosen three (3) set screws that secure bearing
collar to chopper axle.
B. Remove seven (7) carriage screws and flange
nuts that secure endplate to machine frame.
C. Slide bearing and endplate from chopper axle
and frame.
2
D. If necessary, remove bearing from bearing plate.
Figure 22
1.
Chopper axle
2.
Reinforcing ring
ProCore Processor
Page 6 -- 21
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)