Steering/Auxiliary Pump Repair (Models 30582 and 30583)
10
5
9
8
7
360 to 380 in--lbs
(40.7 to 42.9 N--m)
6
5
4
3
2
1
360 to 380 in--lbs
(40.7
to 42.9 N--m)
11
12
13
8
14
Figure 39A
1.
2.
3.
4.
5.
Cap screw (4 used)
Shaft seal
Pre--load seal
Load seal
Sealing ring
6.
Front wear plate
11. Rear cover (flow divider) assembly
12. Gear plate
7.
8.
9.
Drive shaft
Dowel
Rear wear plate
13. Idler gear
14. Front body
10. Cap screw (3 used)
Disassembly
6. Carefully remove idler gear and drive gear.
1.
thoroughly. After cleaning, remove plugs and drain any
oil out of the pump.
Plug pump ports and clean the outside of the pump
7. Remove gear plate and rear wear plate from rear
cover.
8.
Remove and discard pre--load seal, load seal and
2.
across thefrontbody,gear plate and rear cover forreas-
sembly purposes (Fig. 39B).
Use a marker or scribe to make a diagonal mark
sealing rings.
IMPORTANT: Make sure not to damage the counter
bore when removing the shaft seal from the front
body.
IMPORTANT: Avoid using excessive clamping
pressure on the pump housing to prevent distorting
the housing.
9.
Remove shaft seal from the front body.
Rear cover assembly includes priority flow di-
Note:
3.
cap screws.
Clamp mounting flange of pump in a vise. Loosen all
vider valveandsteering reliefvalve. Thesecomponents
are retained in the cover with tamper proof plugs. Disas-
sembly of rear cover is not recommended.
4.
Remove pump from the vise and remove cap
screws.
Inspection
IMPORTANT: Topreventcomponentdamage,never
pry components apart. Light tapping with a plastic
hammer on drive shaft should separate pump.
1.
cloth.
Remove nicks and burrs from all parts with emery
2.
wear. Evidence of damage indicates need for compo-
nent replacement.
Inspect gear plate for excessive scoring, gouges or
5.
Carefully remove front body. Lift front body straight
up to allow drive shaft and idler gear to remain in rear
cover. Remove front wear plate. Identify intersecting
gear teeth of drive shaft and idler gear with a marker to
ensure proper gear placement during assembly.
3.
wear.
Inspect front body and rear cover for damage or
Groundsmaster 580--D
Page 4 -- 44.1 Auxiliary (Lift/Counterbalance) System Repairs
Rev. G
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30581, Toro Groundsmaster 580 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)