WORM DRIVE TRANSMISSION
To remove the transmission from the mower proceed as
2. Rotate the adjustment knob under the lower left-
hand side of the control panel ½ turn clockwise to
tighten the belt, or ½ turn counterclockwise to loosen
the belt. Hold the control cable while rotating the
knob to prevent the cable from turning (Fig. 024).
follows:
1.
2.
Remove both rear wheels.
Remove the retaining rings, springs, gears, keys,
clutches, and pivot arms on both sides (“Wheel
Pinion Clutch” on page 5-2).
3.
4.
Remove the belt.
There is a suspension bracket on each side that
secures the transmission and pivot arms to the
chassis. Each bracket has 2 screws. Once they are
removed, the transmission will drop out.
To install, reverse the above process.
Fill the transmission level with the fill plug opening after it
is installed in the chassis. The top of the transmission is
not sealed, so it may leak if filled and tipped.
Fig 024
fig 19
Controls
1.
3.
Knob
2. Cable
Adjusting Wheel Traction Drive
To check the adjustment, slowly squeeze the control
bar towards the handle. The cable is adjusted
correctly when resistance is felt when the control bar
is approximately 1” (25mm) from the upper handle
(Fig. 025).
1.
Stop the engine.
Fig 025
fig 20
WPM Drive Systems Manual
1-13
Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
---|---|
Download File |
|
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)