WHEEL PINION CLUTCH
4.
Assemble the spring arm and pivot arm as shown in
Figure 138.
9. Slide the externally tabbed thrust washer and the
internally tabbed thrust washer onto the output shaft.
Make sure that the tab on the internally tabbed thrust
washer enters the keyway. Secure with the special
retaining clip. Make sure that the center tab fits
properly into the keyway. This will prevent rotation of
the clip on the output shaft.
A
10.
11.
12.
Place the friction ring into the groove on the pivot
arm, flat side out.
Slide the clutch washer onto the shaft so that the
recesses for the key are facing out.
B
C
D
Place the wheel pinion key in the groove on the
output shaft with the leg toward the clutch washer.
Note: There is a left and a right wheel pinion key.
You are using the correct key if, when placed
in the groove, the top of the key is flat and the
straight portion of the leg is perpendicular to
the shaft.
Fig 138
3428-0028
A. Pivot arm
B. Friction washer
C. Key
D. Spring arm
Before assembling further, rotate the clutch washer
back and forth slightly, making sure that the key
actuates properly (Fig. 139).
5.
6.
To increase service life, make sure all parts are
clean prior to assembly and coated with new grease.
If removed, install a new O-ring in the innermost
groove 2-1/4” (5.7cm) in from the end on each
output shaft, making sure that it is fully seated in the
groove. Refer to Figure 000 (3428-0028) above. Not
all models use an O-ring.
7.
8.
Slip the end cap onto the output shaft, but do not
fasten at this time.
Slide the pivot arm and spring arm assembly onto
the output shaft, boss first.
Note: The convex side of the spring arm rivet and
the concave side of the knob on the spring
arm should both be facing the housing.
Fig 139
3428-0028
5-6
WPM Drive Systems Manual
Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
---|---|
Download File |
|
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)