THREE SPEED TRANSMISSION
Special Assembly Notes for Toro Vacu
Power/Lawn-Boy Medallion
4. Slip the two rear end cap fasteners through the
safety shield guide wires then install. Tighten all four
end cap fasteners (Fig. 131).
1.
Slip the gear selection cable into the shift fork lever
through the bottom as shown in Figure 130.
Note: End cap fastener torque: 225 in-lbs. (26 Nm)
A
Fig 131
3428-0122
Fig 130
3428-0123
A. End cap
2.
3.
Bring the transmission assembly into position
underneath the deck, making sure that the end
caps are on the outside of the housing. Before
securing, install the shift fork control arm onto the
shift fork and secure with the cotter pin. Place the
transmission and pivot arm assembly into the deck.
5.
6.
Slip the traction belt into position on the transmission
pulley. Make sure that it does not bind on any of the
bosses.
Slip the end of the traction cable into the belt guide
bracket from the outside. Install the belt guide
bracket onto the top of the transmission, making
sure that the traction belt is inside the guide.
Loosely install the two front end cap fasteners.
Note: Belt guide fastener torque: 130 in-lbs. (15 Nm)
7.
Slip the black plastic transmission cover into place
making sure that the belt falls in the appropriate
grooves. Install the upper BBC cover with the two
flanged head self-tapping capscrews. Make sure
that the top edge is trapped underneath the lip of the
housing.
WPM Drive Systems Manual
4-11
| Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
|---|---|
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)