BBC / BOS / BCS
4.
5.
Remove the bushing from inside the bellcrank.
2. Place the spring onto the control pin. Place the
spring retainer onto the spring and insert the screw
into the control pin. Using the control link to prevent
rotation of the control pin, tighten the flanged head
screw until the retainer bottoms out on the control
pin (Fig. 166).
Using the control link to hold the control pin, remove
the flanged head screw from the control pin (Fig.
166).
3.
Note the orientation of the control link in Figure
167. Make sure that it is installed correctly into the
bellcrank.
E
A
D
B
Fig 166
3428-0093
C
CAUTION! Always wear safety goggles and
gloves when disassembling items under spring
tension or compression.
Fig 167
3428-0088
A. Brake plate lever
B. Control link
C. Shoulder bolt
D. Bellcrank
E. Cable bracket support
6.
7.
Remove the control link from the control pin.
Inspect all parts for wear and damage and replace
as necessary.
4.
Slide a flat washer and a bushing onto the shoulder
bolt and slide into the front side of the bellcrank
as shown in Figure 000. (3428-0088) Complete
reassembly of the bell crank system by sliding
another flat washer onto the carriage bolt.
Bellcrank System Assembly (Toro Vacu
Power/Lawn-Boy Medallion)
1.
Insert the control pin into the recessed area on the
bellcrank.
Note: Lubrication of the bushing is not
recommended.
WPM Drive Systems Manual
6-13
Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
---|---|
Download File |
|
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)