BBC / BOS / BCS
8.
Slip the white nylon washer onto the J end of the
buckling spring. The slotted side of the washer
should face away from the end of the spring. Slip
the spring into position in the rocker arm and the left
control housing as shown in Figure 158.
10. Before installing the right control housing, check
to make sure that both cable sheath ends are fully
seated in their slots in the left housing. Also make
sure that the sleeve passes through all components
including the left control housing. Finally, make sure
that the roll pin passes through the rocker arm and
control bar.
Install the right control housing and secure with the 2
nylon locknuts or 1 locknut and 1 flange nut.
B
11. Install the 3 flanged head screws that retain the two
control box halves.
A
12.
Check for proper operation of the entire BBC
system. Correct as required.
13.
Bend the throttle control locking tab forward to
provide positive lock with the throttle control and
install the throttle control.
14.
Adjust the BBC cable and traction cables as needed.
See page 7-16.
Fig 158
3428-0281
A. Nylon washer
B. Buckling spring
9.
Assemble the right control housing by installing the
leaf spring and pin to retain the leaf spring (Fig.
159).
A
Fig 159
MVC-488
A. Leaf spring
WPM Drive Systems Manual
6-9
| Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
|---|---|
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)