Removing Hydraulic System Components
1.
Thoroughly clean the machine before disconnecting,
removing or disassembling any hydraulic components.
Always keep in mind the need for cleanliness when
working on hydraulic equipment.
The most important rule of hydraulic
system maintenance is . . .
2.
open or exposed.
Put caps or plugs on any hydraulic lines or fittings left
KEEP EVERYTHING
CLEAN !
3.
Put labels on disconnected hydraulic lines and hoses
for proper installation after repairs are completed.
After Repair or Replacement of Components
1.
Check oil level in hydraulic reservoir and add correct
oil if necessary.
IMPORTANT: Drain and refill hydraulic system reservoir
and change oil filter if component failure was severe or
system is contaminated. If there is a severe failure in a
closed loop system, flush all lines, fittings and compo-
nents in the system.
2.
After repairs, check control linkage for proper adjust-
ment, binding or broken parts.
3.
After disconnecting or replacing any hydraulic com-
ponents, operate machine functions slowly until air is
out of system.
4.
Check for hydraulic oil leaks. Shut off engine and cor-
rect leaks if necessary. Check oil level in hydraulic reser-
voir and add correct oil if necessary.
Towing Machines with Hydrostatic Transmissions
It is important to remember that most Toro Commercial
Products are equipped with hydrostatic transmissions.
Pushing or towing these machines can cause damage
to the transmission. Most hydrostatic transmissions are
equipped with a bypass valve, that if opened, allows the
machine to be pushed or towed a short distance.
By–pass
valve
IMPORTANT: Do not push or tow the machine faster
than 2–3 mph (3–4.8 km/hr) because internal trans-
mission damage may occur. The by–pass valve
must be open whenever the machine is pushed or
towed.
IMPORTANT: Running the engine with the by–pass
valve open will cause the transmission to overheat.
Service Tips
Toro Service Training
14
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro 94826SL |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)