Toro Commercial Products Service Tips 94826SL Rev F Manual

GREENSMASTER 1000: Front Roller Position
The front roller on the Greensmaster 1000 can be put in
3
different positions depending on  the application and
needs of  the user.  The front position  is used  when a
groomer is installed, the middle position is used without
a groomer and a third position can be used in extremely
undulating turf conditions.
GREENSMASTER 1000: Quality of Cut
If you are having quality  of cut problems, making sure
the drum is parallel to the reel should be the first step in
correcting the problem. This procedure is shown in the
Greensmaster  1000  Operator’s  Manual  under  LEV-
ELING REAR DRUM TO REEL.
NOTE: When leveling the rear drum to the reel it is im-
portant to have a flat and level surface to work on. It is
recommended that you use a precision steel plate and
a 1/4I  x 1I flat steel strip approximately 24I long (6.5
mm x 25 mm x 61 cm long). You can use the the same
bench plate used for a Greensmaster 3000 series cut-
ting unit.)
Make sure you are using  the correct bedknife for your
application.  There  are  three  (3)  different  bedknives
available for this cutting unit:
1/8I (3.2 mm) low cut bedknife
3/32
5/64
I (2.4 mm) tournament bedknife (standard)
I (1.9 mm) micro–cut bedknife
There are several front roller configurations available:
Aluminum Wiehle roller (standard)
Full roller
Swaged roller
Auxiliary roller extension kit
Remember, when  selecting rollers, that you  will get a
lower “effective” height  of cut in the turf  with a Wiehle
roller than with a full roller. Auxiliary roller extensions can
help prevent scalping at the ends of the bedknife in se-
verely undulating turf conditions at low heights of cut.
Toro Service Training
Service Tips
33
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 48 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website