Removal (Fig. 6)
Position aerator on a firm, level surface. If attached
to tractor, disengage PTO, apply tractor parking brake,
stop engine and remove key from the ignition switch.
Installation (Fig. 6)
1.
1. Make sure that tinnerman nuts (item 8) are properly
positioned to machine. Also, make sure that iso mounts
are placed in cover holes.
2.
Remove rear hood.
2. Position cover to aerator frame and secure with re-
moved fasteners.
3.
To remove pulley shield (item 2), remove four (4)
flange head screws and flat washers that secure pulley
shield to coring frame. Remove pulley shield.
3. After front cover is installed, position shield to aerator
frame and secure with removed fasteners.
4.
To remove front cover (item 1):
4. Install rear hood.
A. Remove one of the pulley shields (see step 3
above).
B. Remove five (5) flange head screws and flat
washers that secure front cover to frame. Remove
front cover.
5.
To remove yoke cover (item 3), remove four (4)
flange head screws and flat washers that secure yoke
cover to hitch frame. Remove yoke cover.
ProCore 864/1298
Page 3 − 9
Chassis
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro ProCore 1298, Toro ProCore 864 |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)