Toro 07155SL Service Manual ProCore 864 1298 Preface Publication

Removal (Fig. 7)
3.  Install gearbox to hitch frame (see Gearbox Installa-
tion in the Service and Repairs  section of Chapter 4 −
Coring Head).
1.
Position aerator on a firm, level surface and discon-
nect aerator from tractor.
4.
(see Driveshaft Installation in the  Service and Repairs
section of Chapter 4 − Coring Head).
Connect  both coring  head driveshafts  to  gearbox
2.
assemblies to prevent them from falling or shifting unex-
pectedly.
Support subframes, coring  frames and hitch frame
5.
1298)
Install  front  covers  (see  Front  Covers   (ProCore
Installation in this section).
3.
1298)
Remove front  covers (see  Front Covers  (ProCore
Removal in this section).
6.
Lubricate grease fittings on subframe pivot tubes.
4.
Disconnect both coring head driveshafts from gear-
box (see Driveshaft Removal in the Service and Repairs
section of Chapter 4 − Coring Head). Position and sup-
port driveshafts away from hitch frame.
5.
Remove gearbox from hitch frame (see Gearbox Re-
moval in the Service and Repairs section of Chapter 4
Coring Head).
6.
Remove lock  nuts that secure  pivot shafts to  sub-
frames and hitch frame.
1
7.
Make  sure  that  aerator  frame  sections are  sup-
ported.
8.
Slide  both  pivot  shafts from  subframe  and  hitch
frame. Locate and retrieve thrust washer (item 16) from
each side of subframe.
2
9.
Lift subframe assemblies from hitch frame. Remove
hitch frame.
Figure 8
10.Inspect
(Fig. 8). Replace bushings if necessary.
bushings in  subframe for wear  or damage
1.
Subframe
2.   Flange bushing
Installation (Fig. 7)
1.
2.
Position hitch frame to subframe assemblies.
Connect both subframes to hitch frame:
A.  Place thrust  washer on each  side of  subframe
pivot tube.
B.  Slide pivot shaft through hitch frame, both thrust
washers and subframe pivot. Make sure that roll pin
in pivot shaft is positioned in frame reliefs.
C. Install  lock nut onto pivot shaft. Tighten lock nut
until the total clearance between the subframe  and
hitch frame is from 0.010” to 0.030” (0.3 to 0.7 mm).
ProCore 864/1298
Page 3 − 11
Chassis
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 72 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website